Eye Bolts

Swing Eye Bolts

Choose a standard / drawing

Standard / drawing type Nominal size d

Request a quote ↗

Equivalent standards

Standard	Standard body

Technical conditions and referenced standards

		Steel	Stainless steel
General technical requirements		GB/T 16938
Thread	Tolerances	Product grade A or B: 6g a; Product grade C: 8g a
Thread	Standard	GB/T 193, GB/T 9145, GB/T 9146
Mechanical properties	Class	Property classes 4.6 and 5.6	A2-50, A2-70
Mechanical properties	Standard	GB/T 3098.1	GB/T 3098.6
Tolerances	Product grade	Product grades A, B and C
Tolerances	Standard	GB/T 3103.1
Surface treatment		No treatment (uncoated and unplated) ; Electroplating requirements in accordance with GB/T 5267.1; Non-electrolytically applied zinc flake coating requirements in accordance with GB/T 5267.2; Hot-dip galvanizing requirements in accordance with GB/T 5267.3	Simple treatment (cleaning and polishing) ; Passivation b
Surface treatment		Any other technical requirements or surface treatments shall be agreed between the purchaser and supplier.
Acceptance inspection and packaging		GB/T 90.1, GB/T 90.2
Surface discontinuities		GB/T 5779.1	–
		a Depending on the coating system selected, a different tolerance position may be required before coating. See GB/T 5267.1, GB/T 5267.2, GB/T 5267.3; b GB/T 5267.4 specifies passivation methods

		Steel	Stainless steel
General technical requirements		GB/T 16938
Thread	Tolerances	Product grade A or B: 6g a; Product grade C: 8g a
Thread	Standard	GB/T 193, GB/T 9145, GB/T 9146
Mechanical properties	Class	Property classes 4.6 and 5.6	A2-50, A2-70
Mechanical properties	Standard	GB/T 3098.1	GB/T 3098.6
Tolerances	Product grade	Product grades A, B and C
Tolerances	Standard	GB/T 3103.1
Surface treatment		No treatment (uncoated and unplated) ; Electroplating requirements in accordance with GB/T 5267.1; Non-electrolytically applied zinc flake coating requirements in accordance with GB/T 5267.2; Hot-dip galvanizing requirements in accordance with GB/T 5267.3	Simple treatment (cleaning and polishing) ; Passivation b
Surface treatment		Any other technical requirements or surface treatments shall be agreed between the purchaser and supplier.
Acceptance inspection and packaging		GB/T 90.1, GB/T 90.2
Surface discontinuities		GB/T 5779.1	–
		a Depending on the coating system selected, a different tolerance position may be required before coating. See GB/T 5267.1, GB/T 5267.2, GB/T 5267.3; b GB/T 5267.4 specifies passivation methods

		Steel	Stainless steel
General technical requirements		GB/T 16938
Thread	Tolerances	Product grade A or B: 6g a; Product grade C: 8g a
Thread	Standard	GB/T 193, GB/T 9145, GB/T 9146
Mechanical properties	Class	Property classes 4.6 and 5.6	A2-50, A2-70
Mechanical properties	Standard	GB/T 3098.1	GB/T 3098.6
Tolerances	Product grade	Product grades A, B and C
Tolerances	Standard	GB/T 3103.1
Surface treatment		No treatment (uncoated and unplated) ; Electroplating requirements in accordance with GB/T 5267.1; Non-electrolytically applied zinc flake coating requirements in accordance with GB/T 5267.2; Hot-dip galvanizing requirements in accordance with GB/T 5267.3	Simple treatment (cleaning and polishing) ; Passivation b
Surface treatment		Any other technical requirements or surface treatments shall be agreed between the purchaser and supplier.
Acceptance inspection and packaging		GB/T 90.1, GB/T 90.2
Surface discontinuities		GB/T 5779.1	–
		a Depending on the coating system selected, a different tolerance position may be required before coating. See GB/T 5267.1, GB/T 5267.2, GB/T 5267.3; b GB/T 5267.4 specifies passivation methods

		Steel	Stainless steel
General technical requirements		GB/T 16938
Thread	Tolerances	Product grade A or B: 6g a; Product grade C: 8g a
Thread	Standard	GB/T 193, GB/T 9145, GB/T 9146
Mechanical properties	Class	Property classes 4.6 and 5.6	A2-50, A2-70
Mechanical properties	Standard	GB/T 3098.1	GB/T 3098.6
Tolerances	Product grade	Product grades A, B and C
Tolerances	Standard	GB/T 3103.1
Surface treatment		No treatment (uncoated and unplated) ; Electroplating requirements in accordance with GB/T 5267.1; Non-electrolytically applied zinc flake coating requirements in accordance with GB/T 5267.2; Hot-dip galvanizing requirements in accordance with GB/T 5267.3	Simple treatment (cleaning and polishing) ; Passivation b
Surface treatment		Any other technical requirements or surface treatments shall be agreed between the purchaser and supplier.
Acceptance inspection and packaging		GB/T 90.1, GB/T 90.2
Surface discontinuities		GB/T 5779.1	–
		a Depending on the coating system selected, a different tolerance position may be required before coating. See GB/T 5267.1, GB/T 5267.2, GB/T 5267.3; b GB/T 5267.4 specifies passivation methods

Product overview

An eye at one end allows the bolt to pivot on a matching pin. Specify the thread, eye bore and length. This listing does not establish a lifting capacity. If hot forging is required, state it with the material and size in your enquiry so the production method can be confirmed.

For a quote, share the required dimensions, finish and quantity.

Swing Eye Bolts

GB/T 798-2021 dimension drawing

Specification parameters

Equivalent standards

Technical conditions and referenced standards

Product overview